Upgrade E-Cigarettes X6 Micro USB Charge PCB with 700mAh USB Charge PCB

Working Paremeter
1. Resistance: 0.8-3ohm;
2. Quiescent Current: <5uA;
3. Output: 3.3v, 3.7v, 4.2v
4. Smoke Method: Press the button to make the heating wire work;
5. Smoking Timeout Indication

Functions
1. Voltage of Battery: 3.7V rechargeable Battery;
2. Low Voltage Detection: When the voltage of battery is <3.2± 0.1v, press button continuously and the corresponding light flash 10 times, then into hibernation, the heating wire has no output.

User Guide
1. Charging Mode: The red and blue light flashes 3 times, then into hibernation, tacitly approve the first gear output and the quiescent current≤ 5uA;
2. Load: 1.5-3ohm;
3. Gear Switch: Under the charging mode, press button 3 times continuously within 2 seconds, switch to the appropriate gear, the corresponding light flashes 3 times then turns off;
4. Output method: The first gear output: Average voltage 3.3v
The second gear output: Average voltage 3.7v
The third gear output: Average voltage 4.2v
5. Smoking Timeout Indication: Press the button the corresponding light on show, and the output voltage driver heating wire is working. Then release the button, the light has no shown, if no any actions within 2 seconds, indicates e-cig turn to hibernation;
6. Smoking overtime indication: Once smoking more than 10 seconds, e-cigarette will turn off MOS and led light flashes 8 times, indicates that smoking overtime.
7. Lock Indication: Press the button 5 times continuously within 2 seconds, switch to the appropriate gear, and the light flashes 3 times, the e cig is locked, press the lock button has no respond.

Our Services

Pre-sale service
From raw material to finished products, every process is tested and controlled professionally

On sale service
1. Please tell us the mode and quantity and other request;
2. OEM and ODM service over 4 years. We can make design according to your requirement on the base of our PCB;
3. Proforma Invoice confirmed, the other will be arranged upon receipt of your payment;
4. Confirm and ship the goods then tracking number will be sent by email.

After sale service
1. Warranty: 90days;
2. We will replace the broken parts with new parts in the next order;
3. Choose the cheapest and safest forwarder;
4. Track the order until you get the goods.

How to order?
1. Please tell us the model you are interested in.
2. We will send the PI and sample asap
3. It is appreciate that your any comments of our products and we'll try our best to satisfy your needs.
4. The order will be arranged upon receipt of your payment.